TradeProfy
Loading global marketscrypto live · forex ECB

Popular & new

Most used

New this month NEW

New this month

Education and estimation only. TradeProfy is not a registered investment adviser in any country and does not recommend buying or selling any security, currency or crypto-asset. Leveraged trading can lose money quickly.

Live crypto screener

Every Binance spot pair, updated about once a second, with RSI, trend, volatility and real countdown timers. New listings appear on their own.

Mantu KumarBy Published 9 November 2026Last reviewed 19 November 2026How the numbers are produced
Loading the live crypto screener…

What this live crypto screener answers

A screener is a question you ask the whole market at once. “Which coins are in an uptrend but pulled back this week?” “Which pairs moved more than 5% today on real volume?” “What was listed on Binance in the last month?” Instead of opening fifty charts, you set the conditions and the table shows only the pairs that meet them.

This page does that for every spot pair that is trading on Binance, one of the largest crypto exchanges by spot volume. It reads the full list of pairs from Binance each time it loads and again every ten minutes, so a coin listed this afternoon shows up without anyone editing the page. Prices then stream in about once a second. Nothing in the table is typed in by hand, cached on our server or smoothed to look busy.

In short

  • Prices update about once a second over one WebSocket connection; if it drops, the page switches to a 5-second refresh and says so in the status bar.
  • RSI, ATR, trend and volatility are calculated in your browser from daily candles, with today’s live price as the last bar.
  • The countdown shows when the daily candle closes (00:00 UTC, which is 05:30 in India). Daily indicators “settle” only then.
  • New listings appear on their own and carry a NEW badge while they have fewer than 30 daily candles.
  • It is a filter. It never says buy or sell.

What “live” means on this page

Binance publishes a market-wide “mini ticker” stream. Once a second it sends the latest price, the 24-hour open, high and low, and the 24-hour traded value for every pair whose numbers changed in that second. Pairs that did not trade are simply not in the message, which is why some rows sit still while others flicker. The screener keeps one connection open for all pairs, rather than one per coin, which is the method Binance recommends for this kind of display.

The status bar under the tabs tells you exactly what you are looking at:

StatusWhat is happeningWhat to do
Live (green, pulsing)The WebSocket is connected and the last push arrived a moment ago. “Last update” counts the seconds.Nothing. This is normal.
Live via REST (every 5 s)The stream is down or blocked on your network, so the page asks Binance for a full snapshot every five seconds.Numbers are still current, just less frequent. It switches back by itself.
Reconnecting…The connection closed. The page waits 1, 2, 4… up to 30 seconds between attempts so it never hammers the exchange.Wait a few seconds.
No update for 15 sConnected, but silent. Rare, usually a network hiccup.If it lasts, reload.
PausedYou pressed Pause, or the tab is hidden. Hidden tabs disconnect to save your data and battery.Come back to the tab; it fetches a fresh snapshot first, then resumes streaming.
Offline / data unavailableBinance could not be reached. Some countries and office networks block it.The page keeps retrying. Old numbers are never shown as live.

The flash on a price cell (green up, red down) only happens when the price really changed. If your device asks for reduced motion, the flash is switched off.

Is it fine to keep it running all day?

Yes. A live public price feed is ordinary for a market page, and it does not create a problem for you or for the site. The things that can go wrong with live data are practical ones, and each is handled:

  1. Rate limits. The page uses one stream for the whole market. Indicator history (daily candles) is fetched once per pair, six at a time with a pause between batches, and kept in your browser for six hours. A REST snapshot of all pairs is one request.
  2. Connection limits. Binance closes stream connections after 24 hours. The screener reconnects a little before that on its own.
  3. Hidden tabs. When you switch tabs or lock your phone, the connection closes. When you return, you get a fresh snapshot before the stream resumes, so you never see a “live” number that is actually minutes old.
  4. Layout jumps. Numbers use fixed-width digits and the table re-sorts at most every five seconds (not while your mouse is over it), so rows do not jump under your finger.
  5. Data use. The stream is small: typically a few kilobytes per second. An hour is roughly the size of a few photos.

The timers, and why the daily close matters

Crypto trades every day, all day, but almost every daily chart on major exchanges cuts the day at 00:00 UTC. That is 05:30 in India, 08:00 in Singapore, 09:00 in Tokyo, 00:00 in London in winter (01:00 in summer) and 19:00 the evening before in New York in winter.

Until that moment, today’s daily candle is unfinished. Its close is simply the latest price, so every indicator built on daily closes moves with it. An RSI of 31 at 14:00 UTC can be 28 an hour later and 34 at the close. The Daily candle closes in timer counts down to the moment the number stops moving. The Weekly close timer counts to Monday 00:00 UTC, when weekly candles finish.

A habit that helps: decide what you will look at after the close, and use the intraday numbers only as a preview. Many traders who use daily rules do their scan in the first hour after 00:00 UTC for exactly this reason.

How new coins get in automatically

Every ten minutes (the New-listing check countdown) the screener asks Binance for its current list of trading pairs. Anything new is added, anything delisted is removed. Leveraged tokens (names ending in UP, DOWN, BULL or BEAR) are left out because their prices are designed to decay and would distort volatility filters.

The NEW badge is not a guess. It appears when a pair has fewer than 30 daily candles on Binance, which means it has been trading there for less than a month. Treat those rows with extra care: RSI(14) is barely defined, the 200-day trend is impossible, and first weeks after a listing are often the most volatile in a coin’s life. A coin can also be old but new to Binance; the badge describes the pair, not the project.

Reading the columns

ColumnHow it is calculatedA sensible way to read it
LastLatest traded price on Binance for that pairContext for everything else. Other exchanges can differ slightly.
24hLast price ÷ price 24 hours ago − 1 (rolling, not since midnight)“How much did it move in the last day?”
7d, 30dLast price ÷ the daily close 7 or 30 days ago − 1Short and medium momentum. Compare with the 24h figure to see if today is with or against the trend.
7-day lineLast seven daily closes plus the live priceShape at a glance: steady climb, spike, or slide.
RSI 14Wilder’s Relative Strength Index on daily closes, live last barAbove 70: recent closes mostly up. Below 30: mostly down. It describes, it does not predict a turn.
TrendUp if price > EMA 50 > EMA 200; down if the reverse; otherwise mixed (+ above EMA 200, − below)The regime. Pullback strategies want “Up”; mean-reversion traders avoid fighting “Down”.
ATR %14-day average true range ÷ price; today’s bar uses the rolling 24-hour rangeThe normal daily swing. Use it to place stops outside noise (see the example below).
Vol (ann.)Standard deviation of up to 90 daily log returns × √365Comparable risk number across coins. 60% is calm for crypto; 150% is wild.
From 1y highLast price ÷ highest high of the past 365 days − 10% means at the yearly high; −80% means deep in a drawdown.
24h valueQuote volume in the last 24 hours, converted to US dollarsLiquidity. Thin pairs move on small orders and have wider spreads.

Rows show a faint “…” while their daily history loads. The page loads history for the rows you can see first, so scrolling down may show a short wait. That is deliberate: it keeps the page fast and within Binance’s limits.

Five practical ways to use it

1. The after-close scan

Set “Top 100”, trend “Uptrend”, RSI “30–50”. After 00:00 UTC, this lists liquid coins whose longer trend is up but whose last two weeks were weak. That is a list to study, not a list to buy: open each chart, look for a reason the pullback might be ending, and decide where your idea is proven wrong.

2. Volatility-aware stop and size

Suppose a coin trades at $150 with ATR at 4.2%. One ATR is $6.30. If you place a stop 1.5 ATR away, that is $9.45 below entry, at $140.55. With a $5,000 account and a 1% risk rule ($50), the size is $50 ÷ $9.45 ≈ 5.29 coins, a position of about $793. A calmer coin with ATR 2% would allow a tighter stop and a larger position for the same $50 risk. The position size calculator does this arithmetic for you; the position size guide explains every step.

3. Finding real movers, not noise

Set 24h “Up more than 5%” and minimum value “≥ $10M”. Thin pairs that jump 30% on a few thousand dollars disappear, and you see moves that had real money behind them. Then sort by 30d: a +8% day inside a −40% month is a very different story from a +8% day inside a steady uptrend.

4. Watching what is new

Tick “New (< 30 days)”. You see what Binance listed recently and how it has traded since. Look at “From 1y high”: many new listings trade far below their first-week high, which is worth knowing before you get excited by a launch.

5. A quick market-breadth read

Switch to Heatmap. A screen that is mostly green with a few red tiles is a broad rally; a mostly red screen with one green giant is something else. Breadth will not tell you what happens next, but it tells you whether a move is the whole market or one coin.

Worked example: reading one row properly

Imagine a row like this (illustrative numbers): Last 2.10, 24h +6.4%, 7d +1.2%, 30d −18%, RSI 46, Trend ◆ Mixed −, ATR % 7.1%, From 1y high −63%, 24h value $41M.

One screener row, read from long to shortIllustrative coin: last 2.10. Same row, four time frames.From 1-year high−63%30 days−18%7 days+1.2%24 hours+6.4%ATR 7.1% means a normal day already swings about 15 cents; a 10-cent stop sits inside the noise.1234
Pencil lesson: start with the longest bar, not the brightest one.
  1. −63%. The long picture: a deep decline from the high.
  2. −18%. Still falling over the month.
  3. +1.2%. Flat over the week once today’s bounce is included.
  4. +6.4%. The number that caught your eye, and mostly a recovery of earlier losses.

On the real screen: Sort the screener above by 30-day change and compare it with the 24-hour column.

Good habitCheck the trend column and ATR before reacting to a 24-hour move.

Common mistakeBuying a coin because it led the 24-hour list.

  • The 24-hour jump looks big, but the 7-day figure is only +1.2%: today mostly recovered earlier losses.
  • The 30-day and the 1-year-high figures say the bigger picture is a long decline. “Mixed −” confirms price is below its 200-day average.
  • ATR of 7.1% means a normal day already swings about 15 cents. A stop 10 cents away would likely be hit by noise.
  • $41M of daily value is enough to trade without huge slippage for most individuals, but far from the top coins.

Read together: a bounce inside a downtrend in a volatile coin. That is neither a buy nor a sell; it tells you which questions to ask next.

When a crypto screener misleads you

  • Unfinished candles. Every daily number is provisional until 00:00 UTC.
  • One exchange’s view. These are Binance prices. On a fast day, another exchange may be a fraction of a percent away, and some coins trade mostly elsewhere.
  • Survivorship. Only pairs trading today are listed. Coins that were delisted after collapsing are gone from the table, which makes the market look healthier than history was.
  • Stablecoins and fiat. A USDC/USDT row has almost no volatility and would top “calmest” lists, so stablecoins and fiat pairs are hidden by default.
  • Lagging averages. EMA 200 trends turn late by design. A coin can fall 30% before the label changes.
  • Indicators are not reasons. An RSI of 25 has preceded both sharp rebounds and further crashes. The column tells you what happened, not why.

Before you trade crypto: country-by-country basics

The screener works the same everywhere, but the rules around buying crypto do not. These notes cover the main points as of the review date; they are a starting point, not tax or legal advice.

India

Gains from transferring “virtual digital assets” are taxed at a flat 30% (plus cess) under section 115BBH of the Income-tax Act, with no set-off of losses against other income, and a 1% TDS applies to transfers above the threshold under section 194S. Exchanges serving Indians must register with the Financial Intelligence Unit (FIU-IND). Some offshore exchanges have been blocked for not registering, which can also stop their public data from loading in India.

United States

The IRS treats digital assets as property, so selling, swapping or spending them can create a capital gain or loss, reported on Form 8949. Binance.com does not serve US residents; Binance.US is a separate company with its own listings, so a pair on this screener may not be available to you.

United Kingdom

HMRC treats most crypto disposals as subject to Capital Gains Tax. Since October 2023, crypto promotions to UK consumers must follow the FCA financial promotions rules, which is why many UK sign-up flows include extra warnings and a 24-hour cooling-off period for new investors.

European Union

The Markets in Crypto-Assets Regulation (MiCA) applies in full from 30 December 2024. Crypto-asset service providers need authorisation in a member state, and stablecoin issuers face specific rules, which has led some exchanges to restrict certain stablecoin pairs for EU users. Tax treatment is national: Germany, for example, has generally exempted private disposals held for more than one year.

Canada, Australia, Singapore, UAE and others

Canada and Australia treat most crypto disposals as capital gains events for individuals (business-level trading can be taxed as income). Singapore does not tax capital gains for individuals but licenses service providers through the Monetary Authority of Singapore. The UAE regulates virtual-asset firms through VARA in Dubai and the ADGM and DIFC regulators. In every country, check your own tax authority’s guidance and whether the exchange you use is registered locally.

Countries not listed here

Not covered here. Search for your national financial regulator and tax authority, and look for their guidance on “crypto-assets” or “virtual assets”. If an exchange is not registered with your regulator, that is worth knowing before you deposit anything.

Engineering notes, for the curious

The universe comes from exchangeInfo (status TRADING), the first snapshot from the 24-hour mini ticker for all symbols, and the live updates from the !miniTicker@arr stream on Binance’s market-data host. Daily candles (up to 400) are stored in your browser’s IndexedDB for six hours and refreshed after 00:00 UTC. RSI and ATR keep their Wilder state from completed candles and add today’s live bar on each update, so recalculating 200 rows every second costs almost nothing. Your filters and view are remembered in this browser only; nothing is sent to TradeProfy.

Want the multi-asset version with crypto and forex side by side? Use the market screener. For funding rates and open interest on the same coins, open the derivatives terminal. For currencies, the forex screener has session clocks and a currency-strength meter.

More cost tools

All fee, tax and prop tools

Questions readers ask about crypto screeners

How often does the crypto screener update?

Prices arrive about once a second through Binance’s all-market WebSocket stream. If the stream is unavailable, the page falls back to a full refresh every five seconds and shows “Live via REST” in the status bar. The status chip always says which mode you are in and how many seconds ago the last update arrived.

Why are some rows not moving?

Binance only pushes pairs whose price changed in that second. Quiet pairs simply have no new trades, so their numbers stay the same until someone trades.

Does the screener include newly listed coins?

Yes. It reads Binance’s list of trading pairs when it loads and every ten minutes after that, so new listings appear without any manual update. A NEW badge marks pairs with fewer than 30 daily candles.

Why does RSI change during the day?

RSI here uses daily closes, and today’s close is not final until 00:00 UTC. Until then the live price stands in for the close, so RSI moves with it. The countdown in the status bar shows when the daily candle closes.

Is the 24h change the same as the change since midnight?

No. It is a rolling 24-hour change: the latest price compared with the price exactly 24 hours earlier. The 7d and 30d columns compare with daily closes.

Why did the table say data unavailable?

Binance could not be reached from your network. Some countries, workplaces and schools block crypto exchanges. The page retries on its own and never shows old numbers as live.

Can I export the results?

Yes. Export CSV downloads the rows currently shown, with a UTC timestamp, straight from your browser. Nothing goes through a TradeProfy server.

Is a coin that passes my filter a good buy?

No screener can say that. It only shows which coins meet measurable conditions right now. Your entry reason, your stop, your costs and your position size are separate decisions.

What is a crypto screener?

A table of many coins that you can filter and sort by conditions such as price change, RSI, trend or traded value, so you see only the markets that match what you are looking for instead of opening chart after chart.

Where is the crypto screener in TradingView?

TradingView lists its screeners under the Products menu (Screeners), including a crypto screener. This page is an alternative that streams every Binance spot pair live and shows how each column is calculated.

Which crypto screener is best?

The one whose data source, update speed and columns fit how you trade. Check how often it refreshes, whether it covers new listings, and whether it says where the data comes from; a screener that shows stale prices as live is worse than none.

Can I use a crypto screener for scalping?

A screener helps choose which pairs to watch, for example those with high traded value and wide ATR. Scalping decisions need the order book and a fast chart; this screener links each row to the live chart and the derivatives terminal.

Sources

  1. Binance Spot API: market data endpoints and limits
  2. Binance Spot API: WebSocket streams (all-market mini ticker)
  3. J. Welles Wilder, New Concepts in Technical Trading Systems (1978): RSI and ATR definitions – summary of the original method
  4. Income Tax Department of India: section 115BBH and 194S (virtual digital assets)
  5. IRS: Digital assets
  6. FCA: cryptoasset financial promotions
  7. European Securities and Markets Authority: Markets in Crypto-Assets Regulation (MiCA)

Sources checked 9 November 2026. Found an error? Tell us and it goes into the corrections log.

Education and estimation only. Nothing on this page is investment, tax or legal advice, and nothing here tells you to buy or sell. Check figures with your broker, exchange or tax adviser before you act.

Mantu Kumar, founder of TradeProfy

Written and maintained by Mantu Kumar

This page explains how to interpret the crypto screen’s symbols and measures.

Read Mantu’s profile · Methodology and data sources