TradeProfy
STT delivery0.1% buy & sellSTT intraday0.025% sellSTT futures0.05% sellfrom 1 Apr 2026STT options0.15% of premiumfrom 1 Apr 2026NSE txn equity0.00307%NSE txn futures0.00183%NSE txn options0.03553% of premiumStamp duty delivery0.015% buySEBI fee₹10 per croreGST18% on feesCTT MCX futures0.01% sellNifty lot65 unitsSTT delivery0.1% buy & sellSTT intraday0.025% sellSTT futures0.05% sellfrom 1 Apr 2026STT options0.15% of premiumfrom 1 Apr 2026NSE txn equity0.00307%NSE txn futures0.00183%NSE txn options0.03553% of premiumStamp duty delivery0.015% buySEBI fee₹10 per croreGST18% on feesCTT MCX futures0.01% sellNifty lot65 units

Popular & new

Most used

New this month NEW

New this month

Education and estimation only. TradeProfy is not a SEBI-registered adviser and does not recommend buying or selling any security.

Bracket order calculator

A bracket order has three prices: entry, target and stop-loss. Enter them with your quantity and broker to see what you keep if the target fills, what you lose if the stop fills, the reward to risk once charges are taken out, and the win rate the plan needs to break even.

Mantu KumarBy Published 17 November 2026Last reviewed 17 November 2026How we check our numbers

In short

  • Charges come off the winning exit and are added to the losing one, so the real reward to risk is always worse than the chart.
  • A 2 : 1 intraday bracket on 200 shares at ₹500 becomes 1.77 : 1 after charges and needs a 36.1% win rate, not 33.3%.
  • The narrower the bracket, the more the charges matter. A ₹2.50 target loses a sixth of its profit to costs.
  • Slippage on the stop-loss can cost more than all the brokerage. Add it before you trust the numbers.

What a bracket order is

A bracket order places three orders together. The first opens the position. The other two sit on either side of it: a target order that takes profit and a stop-loss order that limits the loss. When one of the two exits fills, the other is cancelled automatically. The position is “bracketed” between a known best case and a known worst case.

A cover order is the simpler relative. It has an entry and a compulsory stop-loss but no target, so you close the winning side yourself. For this calculator a cover order is the same trade: enter the price where you plan to exit as the target.

Several Indian brokers withdrew the classic bracket order after the margin rules changed in 2020 and 2021, and offer GTT or OCO (one-cancels-other) orders that do the same job. The arithmetic on this page applies to all of them, because it depends only on the three prices and the charges.

Worked example: target and stop priced after charges

Buy 200 shares intraday at ₹500 with a target of ₹510 and a stop-loss at ₹495, at a broker charging ₹20 or 0.03% per order.

Target fills at ₹510Stop-loss fills at ₹495
Gross profit or loss+₹2,000.00−₹1,000.00
Brokerage₹40.00₹40.00
STT₹25.50₹24.75
Exchange, SEBI, stamp duty₹9.40₹9.31
GST₹8.35₹8.34
Total charges₹83.26₹82.39
Net result+₹1,916.74−₹1,082.39

On paper this is a 2 : 1 trade: risk ₹5 a share to make ₹10. After charges the reward to risk is 1.77 : 1, because charges come off the win and are added to the loss. The win rate needed just to break even rises from 33.3% to 36.1%.

A bracket order after chargesBuy 200 shares at ₹500 with a ₹510 target and a ₹495 stop-loss, ₹20 or 0.03% per order.₹492₹496₹500₹504₹508₹512Target ₹510+₹2,000 gross → +₹1,916.74 netBreak-even ₹500.42charges covered hereEntry ₹500200 shares, ₹1,00,000Stop ₹495−₹1,000 gross → −₹1,082.39 net₹10₹52 : 1 on the chart → 1.77 : 1 after charges1234
Pencil lesson: the ladder draws from the entry outwards. The dashed line is where costs are covered.
  1. Entry, ₹500. The first order. Brokerage and stamp duty start here, and the intraday position blocks at least 20% margin.
  2. Target, ₹510. Gross ₹2,000, charges ₹83.26, net ₹1,916.74. About 42 paise of each ₹10 is charges.
  3. Stop-loss, ₹495. Gross loss ₹1,000, charges ₹82.39, net loss ₹1,082.39. Charges are added to a loss, never refunded.
  4. Break-even, ₹500.42. The exit price at which the trade earns nothing. Anything between ₹500 and here is a small loss.

On the real screen: Put these four prices into the calculator above and the tiles show the same net figures, plus the win rate needed to break even: 36.1%.

Good habitRead the reward to risk after charges, not off the chart.

Common mistakePlacing the stop so close that ordinary movement and charges take most of the planned reward.

The trade also has to move 42 paise in your favour before it earns anything: the break-even exit is about ₹500.42.

Five brackets on the same trade

The width of the bracket changes how much of it the charges consume. Here are five versions of the same entry, 200 shares at ₹500, every one planned at 2 : 1 on the chart.

Target / stop-lossNet profit at targetNet loss at stopReward to risk after chargesWin rate to break even
₹502.50 / ₹498.75₹417.18₹332.611.25 : 144.4%
₹505 / ₹497.50₹917.03₹582.541.57 : 138.9%
₹510 / ₹495₹1,916.74₹1,082.391.77 : 136.1%
₹520 / ₹490₹3,916.17₹2,082.111.88 : 134.7%
₹550 / ₹475₹9,914.44₹5,081.241.95 : 133.9%
Wider brackets keep more of the 2 : 1 planFive brackets on 200 shares at ₹500, each planned at 2 : 1. Bars show the ratio after charges.target / stop distancewin rate to break even₹2.50 / ₹1.251.25 : 144.4%₹5 / ₹2.501.57 : 138.9%₹10 / ₹51.77 : 136.1%₹20 / ₹101.88 : 134.7%₹50 / ₹251.95 : 133.9%planned 2 : 1, 33.3%1234
Pencil lesson: charges are almost the same in every row because turnover hardly changes. The width is what differs.
  1. Tightest bracket, 1.25 : 1. A ₹2.50 target and ₹1.25 stop. About ₹83 of charges is a third of the gross win, so the trade needs a 44.4% win rate.
  2. The worked example, 1.77 : 1. A ₹10 target and ₹5 stop. Still short of the plan, but the cost is now a twelfth of the win.
  3. Widest bracket, 1.95 : 1. A ₹50 target and ₹25 stop. Charges barely change, so the ratio is close to the plan.
  4. The plan, 2 : 1. Every bracket was drawn at 2 : 1 on the chart. The dashed line is what they would be with no charges.

On the real screen: Change the target and stop in the calculator while keeping the 2 : 1 shape, and watch the after-charges ratio move.

Good habitIf the setup only works with a very tight bracket, reduce the quantity so the charges are worth paying.

Common mistakeThinking a wider bracket is easier to hit. It only means the cost is a smaller share of it.

Charges are between ₹81 and ₹86 in every row, because they depend on turnover, which barely changes. What changes is the profit they are taken from. On the narrowest bracket they remove about a sixth of the gross win and add a third to the gross loss. A wider bracket keeps more of its planned ratio, at the price of a larger loss when the stop is hit, so the quantity has to come down to keep the rupee risk the same.

Trailing stop-loss. Some bracket orders let the stop follow the price by a fixed step. A trailing stop can improve the trigger as the trade moves your way; the actual fill still depends on the market when it triggers.

The win rate a bracket needs after charges

A plan with a fixed target and stop has a simple break-even rule. If every trade ends at one of the two exits, it breaks even when

Win rate = net loss at the stop ÷ (net profit at the target + net loss at the stop)

With no charges a 2 : 1 bracket needs one win in three, 33.3%. With charges the figure rises, and it rises most for tight brackets:

Line chart: the win rate needed to break even falls from 44.4% for a ₹1.25 stop to 33.9% for a ₹25 stop, approaching the 33.3% of a 2:1 trade with no charges.
The narrower the bracket, the further the real break-even win rate sits above the textbook 33.3%.

If the target is so close that the gross profit is smaller than the charges, even the winning exit loses money. No win rate can rescue that plan, and the calculator says so instead of printing a percentage. On the worked trade this happens with any target at or below about ₹500.42.

The formula assumes every trade ends at the target or the stop. Trades squared off by the broker at the close, or closed by hand in between, change the real figures, which is why a journal of actual exits is worth keeping. The trade journal records them.

Short brackets: selling first

A short bracket reverses the prices: the target is below the entry and the stop is above it. Sell 200 shares at ₹500 with a ₹490 target and a ₹505 stop. The target nets ₹1,917.45 and the stop loses ₹1,082.75, about the same as the long version, and the ratio is still 1.77 : 1.

The small difference comes from which leg is the sale. Intraday STT is charged on the sell side only, and in a short trade the sale is the entry, so STT is fixed by the entry price rather than the exit. Stamp duty, charged on the buy, moves with the exit instead. Short intraday positions in Indian shares must be closed the same day; a short that is not squared off can lead to an auction at a penalty price, which is far more expensive than any charge on this page.

Brackets on futures and options

The same arithmetic applies in F&O, with very different results. A 1 : 2 plan on one Nifty futures lot, with a 50-point stop and a 100-point target, ends up at about 1 : 1.31 after charges, because STT and exchange charges are taken on ₹16 lakh of contract value. A similar plan on a Nifty option premium keeps far more of its shape, about 1 : 1.86, because option STT is on the premium. The risk-reward guide sets the two side by side; choose Futures or Options in the calculator above to price your own.

Setting the target and the stop

The calculator tells you what a bracket is worth. It does not tell you where to put the prices. Three checks help before you place the order.

  • Is the stop outside normal noise? A stop placed closer than the stock’s usual intraday swing will be hit by ordinary movement. The ATR stop-loss guide shows how to size a stop from recent volatility.
  • Is the target reachable today? Compare the distance to the target with the day’s range so far and with nearby levels. The pivot point calculator gives reference levels from yesterday’s prices.
  • Is the quantity right for the stop? Decide how much you are willing to lose, then divide by the stop distance plus charges per share. The position size calculator does this.

Tight brackets suffer most from charges. A target 0.2% away on a ₹500 stock is ₹1 a share, and the 42 paise break-even takes almost half of it.

Why the stop-loss can fill worse than the price you set

The stop-loss leg is usually a stop-loss market order, or a stop-loss limit order with a small range. When the trigger price trades, the order goes to the market and fills at the next available price. In a fast fall that can be below your stop. The difference is slippage, and it makes the real loss larger than the figure above.

The calculator has a field for this. Enter ₹0.50 of adverse slippage on the worked example and the stop fills at ₹494.50 instead of ₹495. The net loss grows from ₹1,082.39 to ₹1,182.37, the reward to risk falls from 1.77 : 1 to 1.62 : 1, and the win rate needed to break even rises from 36.1% to 38.2%. Half a rupee on the stop costs more than all the brokerage on the trade.

Two habits reduce the surprise. Avoid bracketing thinly traded stocks where the gap between bid and offer is wide, and add a few paise of expected slippage to the stop price when you run the numbers. Intraday brackets are also squared off by the broker before the close if neither leg has filled, often with an additional auto square-off fee.

Margin and leverage on bracket and cover orders

Bracket and cover orders once carried very high leverage because the stop-loss limited the broker’s risk. Under the peak margin rules that took full effect in 2021, intraday positions in equities need at least 20% of the trade value as margin, so leverage is at most five times, whatever the order type. In futures and options the exchange’s SPAN and exposure margin applies in full.

Use the margin calculator for the cash a position blocks, the F&O margin calculator for futures and option selling, and the intraday calculator for a single intraday trade without a bracket.

GTT, OCO and the auto square-off fee

Most Indian brokers now offer GTT (good till triggered) or OCO (one cancels the other) orders where they once offered a bracket order. Two practical differences matter for the numbers here.

  • A trigger places an order; it does not guarantee a fill. When a GTT or OCO leg triggers, the broker sends a limit or market order to the exchange. A limit order in a fast market can be left unfilled, which means the stop you planned may not happen at all.
  • Open intraday positions are closed by the broker near the end of the day. If neither exit fills, the position is squared off automatically, usually with an extra fee. Groww, for example, deducts ₹50 plus GST per position that is not closed before 3:20 pm. That fee is not part of the bracket arithmetic, so add it if your plan allows trades to run into the close.

Sources and assumptions

  1. NSE: STT and transaction charges
  2. Groww help: intraday charges and auto square-off
  3. Zerodha: brokerage and charges

Each scenario is priced as one entry order and one exit order with the same charges engine as the brokerage calculator, checked in November 2026. Rates and tariffs change. Check the official source before you rely on a number, and treat the contract note as the final figure.

Questions people ask

How do I calculate profit on a bracket order?

Profit at the target = (target − entry) × quantity − charges on the two orders. For 200 shares bought at ₹500 with a ₹510 target, gross profit is ₹2,000 and net profit is ₹1,916.74 at a ₹20-or-0.03% broker.

What is the difference between a bracket order and a cover order?

A bracket order has an entry, a target and a stop-loss, and cancels the remaining exit when one fills. A cover order has an entry and a compulsory stop-loss only; you close the profitable side yourself.

Do bracket orders give extra leverage?

Not any more. Since the peak margin rules took full effect in 2021, intraday equity positions need at least 20% margin, so leverage is capped at five times for every order type.

Why is my reward to risk lower after charges?

Charges reduce the profit on a winning trade and increase the loss on a losing one. A 2 : 1 bracket on 200 shares at ₹500 becomes about 1.77 : 1 after intraday charges.

Can I use this for a short trade?

Yes. Choose “Sell first (short)”. The target must then be below the entry and the stop-loss above it. STT is charged on the sell leg either way.

How do I include slippage on the stop-loss?

Enter the expected adverse slippage per unit in the calculator. ₹0.50 on the worked example turns a net loss of ₹1,082.39 into ₹1,182.37 and lowers the reward to risk from 1.77 : 1 to 1.62 : 1.

What if my target is smaller than the charges?

Then even the winning exit loses money and no win rate makes the plan break even. Widen the target, reduce the number of orders, or skip the trade.

Does the calculator include the auto square-off fee?

No. If neither exit fills and the broker closes the position at the end of the day, add its auto square-off fee separately.

Can I use it for a GTT or OCO order?

Yes. Enter the entry, the target leg and the stop leg as prices. The calculator does not depend on what the order type is called.

Mantu Kumar, founder of TradeProfy

Written and maintained by Mantu Kumar

Mantu builds the TradeProfy calculators and checks every formula with worked examples. Each page lists its assumptions. TradeProfy explains costs and maths but never tells you what to buy or sell.

Read Mantu’s profile · How we check our numbers