TradeProfy
STT delivery0.1% buy & sellSTT intraday0.025% sellSTT futures0.05% sellfrom 1 Apr 2026STT options0.15% of premiumfrom 1 Apr 2026NSE txn equity0.00307%NSE txn futures0.00183%NSE txn options0.03553% of premiumStamp duty delivery0.015% buySEBI fee₹10 per croreGST18% on feesCTT MCX futures0.01% sellNifty lot65 unitsSTT delivery0.1% buy & sellSTT intraday0.025% sellSTT futures0.05% sellfrom 1 Apr 2026STT options0.15% of premiumfrom 1 Apr 2026NSE txn equity0.00307%NSE txn futures0.00183%NSE txn options0.03553% of premiumStamp duty delivery0.015% buySEBI fee₹10 per croreGST18% on feesCTT MCX futures0.01% sellNifty lot65 units

Popular & new

Most used

New this month NEW

New this month

Education and estimation only. TradeProfy is not a SEBI-registered adviser and does not recommend buying or selling any security.

Hyperliquid funding rate calculator

Enter your side, size and the oracle price, then either the hourly funding rate shown on Hyperliquid or the premium index. The calculator applies Hyperliquid’s formula and 4%-an-hour cap, and shows what you pay or receive each hour, over your holding period and as a yearly rate, next to the taker fees and the price move you are trading for.

Mantu KumarBy Published 18 November 2026Last reviewed 18 November 2026How we check our numbers

In short

  • Hyperliquid pays funding every hour, at one eighth of an 8-hour rate, capped at 4% an hour.
  • With a small premium the rate is 0.01% per 8 hours: $0.125 an hour on $10,000, paid by longs to shorts.
  • Any premium between −0.04% and +0.06% leaves that rate unchanged; outside the band funding moves one for one with the premium.
  • Three days of baseline funding on $10,000 cost $9, the same as two taker fills at 0.045%.

The funding formula, in plain words

A perpetual future has no expiry, so the exchange needs another way to keep its price near the spot market. Funding is that mechanism: a payment between longs and shorts that pushes the perp back toward the oracle price. Hyperliquid builds it from two parts.

  • The premium index measures how far the perp trades above or below the oracle, using the prices at which a sizeable order would fill. It is sampled every few seconds and averaged.
  • The interest leg is fixed at 0.01% per 8 hours, standing for the cost of borrowing dollars against holding the coin.

The 8-hour rate is premium + clamp(0.01% − premium, −0.05%, +0.05%). Every hour, one eighth of it is charged on position size × oracle price. A positive rate means longs pay shorts.

From the funding formula to dollars an hour0.1 BTC long at an oracle price of $100,000. Premium index at zero.Premium index0%perp price = oracle→8-hour rate0.01%interest leg, kept by the clamp→Hourly rate0.00125%one eighth, paid each hour× $10,000 notional, for 72 hours$0.125 an hour, $9.00 in totalA positive rate means longs pay shorts. $9 is exactly what two taker fills at 0.045% cost on this size.1234
Pencil lesson: one formula, one division, one multiplication.
  1. Premium 0%. The perp trades at the oracle price, so only the interest leg is left.
  2. 0.01% per 8 hours. Hyperliquid’s formula adds clamp(0.01% − premium, −0.05%, +0.05%) to the premium. With a premium of 0, that is 0.01%.
  3. 0.00125% an hour. Funding is paid every hour at one eighth of the 8-hour rate.
  4. $9 over three days. $10,000 × 0.00125% × 72. About 10.95% a year, simple.

On the real screen: The calculator above opens on this example; switch the input to “Premium index” to use the formula.

Good habitCheck the predicted rate before opening a position you plan to hold for days.

Common mistakeTreating funding as negligible on a long hold. Three days here cost as much as the trading fees.

Why funding sits at 0.01% so often

The clamp has a useful side effect. As long as the premium stays between −0.04% and +0.06% per 8 hours, the clamp cancels it and the rate comes out at exactly 0.01%. Funding only moves away from the baseline when the perp trades at a real premium or discount.

Line chart of the 8-hour funding rate against the premium index: flat at 0.01% for premiums from −0.04% to +0.06%, rising one for one outside that band.
The clamp makes funding sticky around 0.01% per 8 hours. Only a premium outside the band moves it.

Outside the band the rate follows the premium minus or plus 0.05%. A premium of +0.20% gives 0.15% per 8 hours, or about $1.88 an hour on $10,000. A discount of −0.10% gives −0.05%, which pays longs about $0.63 an hour.

Three days of funding at four premiums$10,000 long held 72 hours. Taker fees to open and close: $9.Premium 0%pay $9.00Premium +0.06%pay $9.00: still 0.01%Premium +0.20%pay $135.00Premium −0.10%receive $45.00fees $9Rates per 8 hours: 0.01%, 0.01%, 0.15% and −0.05%. Paid or received hourly at one eighth.1234
Pencil lesson: a quiet band where funding does not change, and two sides where it does.
  1. 0%: pay $9. The baseline interest leg.
  2. +0.06%: still $9. Any premium between −0.04% and +0.06% leaves the 8-hour rate at exactly 0.01%, because the clamp absorbs it.
  3. +0.20%: pay $135. Outside the band the rate becomes premium minus 0.05%, here 0.15% per 8 hours.
  4. −0.10%: receive $45. A perp below its oracle price makes shorts pay longs: −0.10% + 0.05% = −0.05% per 8 hours.

On the real screen: Type a premium into the calculator above to see the 8-hour and hourly rates it produces.

Good habitCompare expected funding with the move you are trading for.

Common mistakeHolding a crowded long through days of high positive funding.

Worked examples on a $10,000 position

SituationHourly ratePer dayOver 72 hoursYearly, simple
Baseline, premium 0%0.00125%$3.00 paid by longs$9.0010.95%
Premium +0.20%0.01875%$45.00 paid by longs$135.00164.25%
Premium −0.10%−0.00625%$15.00 paid to longs$45.00 received−54.75%

For comparison, two taker fills at Hyperliquid’s base rate of 0.045% cost $9 on $10,000. At baseline funding a long pays as much in funding over three days as it paid to open and close. At a premium of +0.20% it takes only five hours of funding to equal the fees.

Hourly funding against 8-hour venues

On an exchange that settles every 8 hours, a position open at the settlement moment pays the full 8-hour rate, and one closed a minute before pays nothing. Hyperliquid spreads the same cost across every hour, so a two-hour trade pays two eighths. Over a full day the totals match if the rate is the same; over short holds they can differ a lot.

When comparing venues, put both rates on the same basis first: either per hour or per 8 hours. The funding rate cash-and-carry calculator works with 8-hour rates and adds the hedge leg.

Funding, fees and liquidation together

Funding is paid from margin. On an isolated position it slowly reduces the margin behind the trade and moves the liquidation price closer; on cross margin it comes out of the account. The Hyperliquid liquidation calculator shows how much room a position has, and the exchange fee calculator compares maker and taker fees across venues.

Base-tier fees on Hyperliquid perpetuals are 0.045% taker and 0.015% maker, lower with volume or HYPE staking. Using maker orders for entry and exit cuts the $9 in the example to $3, which changes how long a trade can be held before funding matters.

Reading funding as a crowding signal

Funding is also information. A rate that stays well above the 0.01% baseline for days means longs are paying heavily to stay in, usually because the perp trades at a premium to the oracle. That often happens after a strong rally, when many traders hold leveraged longs. It does not say when the price will turn, but it does say that the cost of waiting is high and that a fall could force many of those longs out at once.

Negative funding is the mirror image: shorts are paying, often after a sharp fall. Read it next to open interest and price. Rising price with rising open interest and rising funding is a crowded long; falling funding as price holds up suggests the crowd has thinned. None of this replaces a stop-loss, and on Hyperliquid funding can swing within hours because it is paid hourly.

Funding on a hedged position

Some traders try to earn funding rather than pay it: short the perp and buy the same amount of the coin on spot, so price moves cancel out and the short collects funding while it is positive. On $10,000 at the baseline rate that is $3 a day, about 10.95% a year, before costs.

CostAmount on $10,000
Perp taker fees, open and close (0.045% × 2)$9.00
Spot taker fees, buy and sell (0.07% × 2)$14.00
Total to open and close the hedge$23.00
Days of baseline funding to cover itabout 8

After about eight days the hedge is ahead, if the rate stays positive. Two risks remain: funding can turn negative, so the short starts paying, and the perp leg can be liquidated on a sharp rally even though the spot leg has gained, because the gain sits in a different account. The cash-and-carry calculator models both legs.

Sources

  1. Hyperliquid docs: funding (formula, hourly payment, 4% cap) – checked 18 November 2026
  2. Hyperliquid docs: fees

The calculator keeps the rate and the oracle price constant for the whole holding period, which real markets do not. Use the predicted rate shown on the exchange and rerun the numbers if you hold for days. Crypto derivatives are high-risk and may not be permitted where you live.

Questions people ask

How is the Hyperliquid funding rate calculated?

An 8-hour rate is worked out as premium + clamp(0.01% − premium, −0.05%, +0.05%), where the premium compares impact prices with the oracle price. One eighth of it is paid every hour.

How often is funding paid on Hyperliquid?

Every hour, at one eighth of the 8-hour rate. Many centralised exchanges pay every 8 hours instead.

What is the default funding rate on Hyperliquid?

When the premium is small, the rate is the interest leg: 0.01% per 8 hours, or 0.00125% an hour. That is about 10.95% a year simple, or roughly 11.6% compounded, paid by longs to shorts.

Is there a cap on Hyperliquid funding?

Yes. Funding is capped at 4% an hour for every asset, a much wider cap than most centralised exchanges.

How much funding do I pay on a $10,000 long?

At the default 0.00125% an hour, $0.125 an hour, $3 a day and $9 over three days. At a premium of +0.20% it rises to $1.875 an hour.

Do longs or shorts pay funding?

When the rate is positive, longs pay shorts. When it is negative, shorts pay longs.

What price is funding calculated on?

The oracle price, not the mark price or your entry price. The payment is position size × oracle price × hourly rate.

How do I convert a Hyperliquid funding rate to APR?

Multiply the hourly rate by 8,760 for a simple yearly figure. 0.00125% an hour is 10.95% a year. Compounding gives about 11.6%.

What are Hyperliquid trading fees?

At the base tier, 0.045% for taker orders and 0.015% for maker orders on perpetuals, falling with volume and staking discounts. Opening and closing $10,000 as a taker costs $9.

Mantu Kumar, founder of TradeProfy

Written and maintained by Mantu Kumar

Mantu builds the TradeProfy calculators and checks every formula with worked examples. Each page lists its assumptions. TradeProfy explains costs and maths but never tells you what to buy or sell.

Read Mantu’s profile · How we check our numbers