Futures profit calculator
Pick a contract or enter your own multiplier, add the entry price, exit price and number of contracts, and see points, ticks, gross profit, costs, net profit and the exit price where the trade breaks even. Presets cover CME micro and E-mini contracts, Nifty, Bank Nifty and MCX.
In short
- Profit = (exit − entry) × multiplier × contracts − costs. For a short, reverse the sign of the price change.
- One tick on MES is $1.25; on ES it is $12.50. One Nifty point on a 65-unit lot is ₹65.
- Indian index futures need about 15 points on Nifty just to cover charges, mostly STT.
- Margin decides what the exchange blocks, not what you can lose. Size from the stop.
The futures profit formula
Every futures contract has a multiplier: the amount of money one full point of price movement is worth for one contract. Profit is the price change multiplied by that amount and by the number of contracts.
Profit or loss = (exit price − entry price) × multiplier × contracts − costs
For a short position the sign is reversed: you profit when the exit price is below the entry price. This is the same formula whether you ask it as “how do I calculate a futures buy position” or “what is one tick worth”. The second question is a special case:
Tick value = tick size × multiplier
- Points, 10.5. Exit minus entry. For a short, entry minus exit.
- Multiplier, $5. The dollar value of a one-point move on one MES contract, set by CME. ES is $50, NQ $20, MNQ $2.
- Contracts, 2. Forgetting this line halves or doubles the answer.
- Gross, $105. Then subtract the all-in commission for both sides of every contract: $4 here, leaving $101.
On the real screen: The calculator above opens on exactly this trade. Change the preset to ES and every dollar figure becomes ten times larger.
Good habitWrite the multiplier next to every futures position you size.
Common mistakeUsing the tick size as if it were the point value. On MES a tick is a quarter of a point.
A tick is the smallest price step the exchange allows. On the Micro E-mini S&P 500 the tick is 0.25 index points and the multiplier is $5, so one tick is worth $1.25 per contract.
Multipliers and tick values for common contracts
| Contract | Multiplier | Tick size | Tick value |
|---|---|---|---|
| Micro E-mini S&P 500 (MES) | $5 per point | 0.25 | $1.25 |
| E-mini S&P 500 (ES) | $50 per point | 0.25 | $12.50 |
| Micro E-mini Nasdaq-100 (MNQ) | $2 per point | 0.25 | $0.50 |
| E-mini Nasdaq-100 (NQ) | $20 per point | 0.25 | $5.00 |
| Micro E-mini Dow (MYM) | $0.50 per point | 1 | $0.50 |
| Micro WTI crude oil (MCL) | 100 barrels | $0.01 | $1.00 |
| WTI crude oil (CL) | 1,000 barrels | $0.01 | $10.00 |
| Micro gold (MGC) | 10 troy ounces | $0.10 | $1.00 |
| Gold (GC) | 100 troy ounces | $0.10 | $10.00 |
| Nifty 50 futures | 65 units a lot | ₹0.10 | ₹6.50 |
| Bank Nifty futures | 30 units a lot | ₹0.20 | ₹6.00 |
| MCX crude oil | 100 barrels | ₹1 | ₹100 |
| MCX gold mini | 100 g, quoted per 10 g | ₹1 | ₹10 |
- Micro Nasdaq, $0.50. The smallest tick here. Easy to oversize, because the number looks harmless.
- Micro S&P 500, $1.25. 0.25 points × $5. A 10-tick stop is $12.50 per contract.
- E-mini S&P 500, $12.50. The same index and tick as MES, ten times the money.
- E-mini Nasdaq, $5. Ten times MNQ. Leaving the micro preset selected understates the risk tenfold.
On the real screen: Pick each preset in the calculator and the “value of one tick” tile shows the same figure.
Good habitConvert your stop into ticks and then into dollars before you place the order.
Common mistakeSizing a full-size contract with a micro contract’s tick value.
CME values are from the exchange’s contract specifications. NSE sets the tick size of index futures by the index level: ₹0.05 up to 15,000, ₹0.10 from 15,000 to 30,000 and ₹0.20 above 30,000. Nifty and Bank Nifty lot sizes are the ones in force from January 2026. Exchanges revise lot sizes and ticks, so confirm the specification for the expiry you are trading. Every preset can be overwritten.
Worked examples
Micro E-mini S&P 500. You buy 2 MES contracts at 5,000.00 and sell at 5,010.50. The move is 10.5 points, or 42 ticks. Gross profit is 10.5 × $5 × 2 = $105. If your all-in commission is $1 per contract per side, costs are $4 and net profit is $101. Costs are covered after 2 ticks, at 5,000.50.
Nifty futures. You buy one lot of 65 at 25,000 and sell at 25,100. Gross profit is 100 × 65 = ₹6,500. Indian charges at a ₹20 broker come to ₹969.61, of which ₹815.75 is STT, leaving ₹5,530.39. The trade needs about 15 points to break even.
MCX crude oil. You buy one lot of 100 barrels at ₹6,000 and sell at ₹6,030. Gross profit is 30 × 100 = ₹3,000. Charges are ₹150.73, including ₹60.30 of commodities transaction tax, leaving ₹2,849.27.
Bank Nifty futures. One lot of 30 bought at 52,000 and sold at 52,200 makes 200 × 30 = ₹6,000 gross. Charges come to ₹932.59, of which ₹783 is STT, leaving ₹5,067.41.
MCX gold mini. The contract is 100 grams and the price is quoted per 10 grams, so the multiplier is 10. A move from ₹72,000 to ₹72,150 is ₹150 × 10 = ₹1,500 gross per lot. Charges are ₹171.17, including ₹72.15 of CTT, leaving ₹1,328.83.
How many ticks it takes to cover costs
Every futures trade starts slightly behind. The question is how far. For US contracts the cost is a fixed amount per contract, so the hurdle is a fixed number of ticks. For Indian contracts most of the cost is a percentage of the contract value, so the hurdle grows with the price.
| Contract | Costs on the worked trade | Value of one tick | Ticks to break even |
|---|---|---|---|
| MES, 2 contracts, $1 per side | $4.00 | $2.50 for 2 contracts | 2 |
| Nifty futures, 1 lot of 65 | ₹969.61 | ₹6.50 | 150 (15 points) |
| Bank Nifty futures, 1 lot of 30 | ₹932.59 | ₹6.00 | 156 (31.2 points) |
| MCX crude oil, 1 lot of 100 barrels | ₹150.73 | ₹100 | 2 |
| MCX gold mini, 1 lot | ₹171.17 | ₹10 | 18 |
On Nifty the charges come to about ₹970 a round trip, and 84% of it is STT. That is why a scalping plan that works on the chart in points can fail in rupees. The STT calculator shows the tax on its own, and the break-even tile in the calculator above shows the exact exit price for your trade.
What to enter as costs
For US and other international contracts, type the all-in cost per contract per side from your broker’s statement. It normally has four parts: the broker’s commission, the exchange fee, a clearing fee and a small regulatory fee. Brokers quote these separately, so add them up before comparing two brokers.
For Indian contracts the calculator works the charges out for you from the same engine as the brokerage calculator: brokerage, STT or CTT, exchange transaction charge, SEBI fee, stamp duty and GST. For crude oil specifically, the global crude oil futures fee calculator compares WTI and Brent, and the MCX commodity charges guide covers every MCX line.
Two costs are not in the formula. Slippage is the gap between the price you expected and the price you got, and one tick each way on two MES contracts is $5. Rollover matters if you hold past expiry; the futures rollover and basis calculator prices it.
Long, short and the mistakes that change the answer
A long position profits when the price rises and a short position profits when it falls. The formula is the same with the sign reversed, so a short of 2 MES contracts from 5,010.50 down to 5,000.00 earns the same $105 as the long example above.
Most wrong answers come from the inputs, not the arithmetic.
- Using the lot size as if it were the multiplier. They are the same thing only when the price is quoted per unit. MCX gold mini is 100 grams, quoted per 10 grams, so the multiplier is 10, not 100.
- Mixing up points and ticks. On MES a point is four ticks. A “10 tick” stop is 2.5 points and $12.50 a contract, not $50.
- Forgetting that costs are charged on both sides. A $1 commission is $2 for the round trip on each contract.
- Reading an old lot size. Nifty moved to 65 and Bank Nifty to 30 from the January 2026 contracts. A calculation done with the previous lot overstates the result.
- Ignoring the currency. Profit on a CME contract is in US dollars. If your account is in another currency, the broker’s conversion rate and fee apply when the profit is converted.
CME micro contracts and Indian index futures compared
A trader moving between US and Indian futures meets two different cost structures.
- US exchange futures charge a fixed amount per contract per side: the broker’s commission, the exchange fee, the clearing fee and a small regulatory fee. A trade in MES at 5,000 and a trade at 6,000 cost the same.
- Indian futures charge mostly percentages of the contract value: STT on the sale, the exchange transaction charge, the SEBI fee and stamp duty, with brokerage capped at ₹20 per order at most discount brokers. When Nifty rises, the cost of trading one lot rises with it.
One consequence is that the micro contracts make sense in the US in a way small lots cannot in India. A trader with a small account can trade one MES contract for a few dollars of costs. The smallest Nifty future carries the same percentage costs as a large one, because there is no smaller lot to trade.
Expiry, settlement and rollover
A futures position held to expiry is settled, and the rules differ by contract.
- Index futures in India, such as Nifty and Bank Nifty, and US equity index futures such as ES and MES are cash-settled. The final profit or loss is paid in cash.
- Stock futures in India are physically settled: a long position held to expiry becomes a purchase of the shares, with delivery STT and delivery charges. The physical settlement calculator prices it.
- WTI crude oil (CL) on CME is physically delivered, while Micro WTI (MCL) is cash-settled. Most traders close or roll before the last trading day.
Rolling a position into the next month means closing one contract and opening another, so it costs a full round trip plus the difference in price between the two months. The futures rollover and basis calculator works it out.
Profit, margin and position size
Futures are traded on margin, so the return on the money you posted is much larger than the percentage move in the price, in both directions. If you enter the margin per contract, the calculator shows the net result as a percentage of it. Treat that number as a measure of risk, not of skill: the same leverage that turns a 0.2% move into a large gain turns it into an equally large loss.
Decide the size before the entry. The futures position size calculator turns an account size, a risk percentage and a stop distance into a number of contracts, and the F&O margin calculator estimates the margin an Indian futures position blocks.
Sources and contract specifications
- CME Group: Micro E-mini S&P 500 contract specifications
- CME Group: E-mini S&P 500 contract specifications
- NSE: equity derivatives contract specifications
- MCX: contract specifications
Multipliers, tick sizes and lot sizes were checked in November 2026; Indian charges use the same engine as the brokerage calculator. Rates and tariffs change. Check the official source before you rely on a number, and treat the contract note as the final figure.
Questions people ask
How do I calculate profit on a futures trade?
Subtract the entry price from the exit price, multiply by the contract multiplier and by the number of contracts, then subtract commission and fees. For a short trade, reverse the sign of the price change.
How much is one tick worth on MES?
One tick on the Micro E-mini S&P 500 is 0.25 index points and the multiplier is $5, so a tick is worth $1.25 per contract. One full point is worth $5.
How do I calculate Nifty futures profit in India?
Multiply the points gained by the lot size of 65 and by the number of lots, then subtract charges. One lot bought at 25,000 and sold at 25,100 makes ₹6,500 gross and ₹5,530.39 after charges at a ₹20 broker.
What is the multiplier for MCX gold mini?
Gold mini is a 100 gram contract quoted per 10 grams, so each ₹1 move in the quote is worth ₹10 per lot.
Does the calculator include taxes on profit?
It includes transaction taxes such as STT and CTT for Indian contracts. It does not include income tax on the profit, which depends on your country and your other income.
How many points does Nifty futures need to break even?
About 15 points on one lot of 65 at a ₹20 broker. Charges on a 25,000 to 25,100 round trip are ₹969.61, and each point is worth ₹65.
How do I calculate Bank Nifty futures profit?
Multiply the points gained by the lot size of 30 and subtract charges. One lot bought at 52,000 and sold at 52,200 makes ₹6,000 gross and ₹5,067.41 net.
What is one tick worth on MCX crude oil?
The tick is ₹1 per barrel and the lot is 100 barrels, so one tick is ₹100 per lot. The mini contract of 10 barrels moves ₹10 per tick.
Is futures profit on CME paid in dollars?
Yes. Profit and loss on CME contracts are in US dollars. An account in rupees or pounds converts at the broker’s rate, often with a conversion fee.
