TradeProfy
Loading global marketscrypto live · forex ECB

Popular & new

Most used

New this month NEW

New this month

Education and estimation only. TradeProfy is not a registered investment adviser in any country and does not recommend buying or selling any security, currency or crypto-asset. Leveraged trading can lose money quickly.

Fibonacci retracement: how to draw it and how to use it honestly

Fibonacci retracements are among the most drawn lines in trading. They are easy to plot and easy to over-trust. This guide explains the numbers, the drawing method, and a disciplined way to use them.

Mantu KumarBy Reviewed 7 November 2026How we check our numbers

Key takeaways

  • Levels are drawn between a swing low and high at 23.6%, 38.2%, 50%, 61.8% and 78.6%.
  • Treat 38.2%–61.8% as a zone, not five exact lines.
  • Choose swings with written rules so you do not redraw after the fact.
  • Wait for a reaction at the zone and put the stop where the trend structure fails.
  • Check the net reward-to-risk to the prior extreme before taking the trade.

Where the numbers come from

The Fibonacci sequence (0, 1, 1, 2, 3, 5, 8, 13, 21…) adds the two previous numbers to get the next. Ratios between its terms approach about 0.618 (the “golden ratio” relationship), 0.382 and 0.236. Traders add 0.5 (not a Fibonacci ratio, but a natural halfway point) and often 0.786 (the square root of 0.618). These percentages are drawn between a swing low and a swing high to mark possible pullback levels.

Level price (uptrend) = High − (High − Low) × ratio
Level price (downtrend) = Low + (High − Low) × ratio
Ratios: 0.236 · 0.382 · 0.5 · 0.618 · 0.786

Worked example

A coin rallies from 40.00 to 60.00, a move of 20.00. The retracement levels sit at 60 − 20 × 0.236 = 55.28, 60 − 20 × 0.382 = 52.36, 60 − 20 × 0.5 = 50.00, 60 − 20 × 0.618 = 47.64 and 60 − 20 × 0.786 = 44.28. If price pulls back to 52.40 and bounces, many traders would say it “held the 38.2%”.

How to draw it on TradeProfy

  1. Open Advanced Charts and pick the market and timeframe.
  2. Choose the Fibonacci tool (the 𝐅 button) from the drawing rail.
  3. For an uptrend, press on the swing low and drag to the swing high. For a downtrend, start at the swing high and drag to the low.
  4. The levels appear with their prices. Select the drawing to move either end; press Delete to remove it.

The hard part is choosing the swing. Different traders pick different highs and lows, which is one reason the levels are less objective than they look. Use clear, obvious swings on the timeframe you trade.

Why the levels sometimes seem to work

There is no physical reason for markets to respect 61.8%. Two practical effects explain why the levels can matter. First, pullbacks of roughly a third to two thirds of the prior move are common in trending markets, so levels in that zone will often be near where pullbacks end. Second, many traders watch the same levels, so orders can cluster there. Neither effect makes any single level reliable.

A disciplined way to use retracements

  • Use a zone, not a line. Treat 38.2%–61.8% as an area where a pullback in a healthy trend often pauses.
  • Wait for confirmation. A bounce candle, a higher low on a lower timeframe, or a break back above a short-term high is more meaningful than price merely touching a level.
  • Put the stop where the idea is wrong. If you buy a pullback to 50%, a stop just below 78.6% or below the swing low tells you the trend structure has failed.
  • Check reward-to-risk. A common target is the prior high. From the 50% level in the example above, the target (60.00) is 10.00 away; with a stop at 44.00 the risk is 6.00, so gross reward-to-risk is about 1.7. Run it through the Trade Planner with your costs.

Extensions

Fibonacci extensions project levels beyond the swing, commonly 127.2% and 161.8%, as possible targets. The same caution applies: they are reference points for planning, not predictions.

Common mistakes

  1. Redrawing until it fits. Moving the anchor points after the fact so a level lines up with a past turn creates false confidence.
  2. Using every level. With five levels, price is always near one of them. Decide in advance which zone matters for your plan.
  3. Ignoring the bigger trend. Retracement buying in a downtrend is catching a falling knife with a ruler.

Combining with other tools

Retracement zones gain weight when they line up with something else: a prior support or resistance level, a rising 50-day average, or an area of heavy past trading. The more independent reasons a level has, the more useful it is as a place to plan a trade, and the easier it is to define where you are wrong.

Choosing the swing: three objective rules

The biggest weakness of Fibonacci retracements is that the result depends on which high and low you choose. These rules make the choice repeatable:

  1. Use confirmed swings. A swing high needs at least three lower highs on each side on the timeframe you trade; a swing low needs three higher lows on each side. A high that has not yet been followed by three lower bars is not confirmed.
  2. Use the most recent complete leg. Measure the last clear move from a confirmed low to a confirmed high (or high to low), not a move from months ago.
  3. Match the timeframe. Draw daily retracements from daily swings. A swing found on a 15-minute chart produces levels that only matter on that timeframe.

Writing these rules down before you draw prevents the most common error, which is moving the anchors until a level lines up with a turn you already know about.

Retracement depth and trend strength

How deep a pullback goes says something about the trend. Shallow pullbacks that stop around 23.6% to 38.2% tend to happen in strong, fast trends where buyers are eager. Pullbacks to 50% or 61.8% are typical of healthy but more ordinary trends. A pullback that goes beyond 78.6% has given back most of the move and leaves the original trend in doubt; many traders stop treating it as a pullback at that point and wait for a new structure.

Pullback depthWhat it often suggestsHow traders react
Up to 38.2%Strong trendLook for early entries; stops tighter
38.2%–61.8%Normal pullbackMain zone for planned entries
61.8%–78.6%Deep pullbackSmaller size or wait for confirmation
Beyond 78.6%Trend in doubtStand aside until a new structure forms

Worked plan on a forex pair

GBP/USD rises from 1.2600 to 1.2900, a 300-pip leg. The 50% level is 1.2750 and the 61.8% level is 1.2715. A trader plans to buy in the zone around 1.2740 if a daily candle closes back above the prior day’s high, with a stop at 1.2660 (below 78.6% at 1.2664, 80 pips risk) and a target at the swing high, 1.2900 (160 pips). Gross reward-to-risk is 2.0. Risking 1% of a $5,000 account ($50) at $10 per pip per standard lot gives 50 ÷ (80 × 10) = 0.0625, rounded down to 0.06 lots. With a 1.5-pip spread, the net reward-to-risk is about 1.95.

Using Fibonacci with the planner

After drawing the retracement in Advanced Charts, place a long or short position from the drawing rail and drag its entry into the zone, its stop beyond 78.6% and its target at the prior extreme. The side panel shows the size and the net result for each handle, so you can see immediately whether the trade is worth taking once costs are included.

Draw a retracement on a live chartUse the Fibonacci tool, then drag a position into the zone to see the numbers.
Open advanced charts →

Key terms

Retracement
A pullback against the prior move, measured as a share of that move.
Extension
A projected level beyond the prior move, such as 161.8%.
Swing high / low
A confirmed turning point with lower highs or higher lows on both sides.
Confluence
Several independent reasons pointing to the same price area.
Golden ratio
About 1.618, linked to the 0.618 ratio used in retracements.
Education only. This guide explains how an indicator or method works. It is not a recommendation to buy or sell anything, and past patterns do not predict future prices. Trading, especially with leverage, can lose money quickly.

Frequently asked questions

Which Fibonacci level is the most important?

Traders most often watch 38.2%, 50% and 61.8%. None is reliable on its own; many treat the area between 38.2% and 61.8% as a zone where pullbacks in a trend often pause.

Is 50% a Fibonacci number?

No. The 50% level comes from the idea that markets often retrace about half of a move. It is included because traders watch it.

Do I draw from wick or close?

Either can work if you are consistent. Wicks capture the full range; closes ignore brief spikes. Use the same method every time so levels are comparable.

Do Fibonacci levels work on crypto and forex?

They can be drawn on any chart. Whether they help depends on the market and the swing chosen; test any rule built on them.

What is the difference between retracement and extension?

Retracements mark levels inside the prior move, where a pullback may end. Extensions project beyond it, as possible targets for the next leg.

Use the Fibonacci method in the pivot point calculator to calculate levels from a prior session. Those levels use the session’s range as their anchor, while retracements on this page start from a chosen swing.

Mantu Kumar, founder of TradeProfy

Written and maintained by Mantu Kumar

Mantu builds the TradeProfy calculators and checks every formula with worked examples. Each page lists its data sources and assumptions. TradeProfy explains costs and maths but never tells you what to buy or sell.

Read Mantu’s profile · How we check our numbers